Doctorado en Ciencias en Ingeniería Mecánica Centro Nacional de Investigación y Desarrollo Tecnológico (CENIDET). 2013.
Maestría en Ciencias en ingeniería Mecánica Instituto Tecnológico de Querétaro. 2004.
Licenciatura en Ingeniería Industrial Mecánica Instituto Tecnológico de Celaya. 1993.
Distinciones
Sistema Nacional de Investigadores Nivel C (Vigencia: 2017/2021 )
Perfil Deseable (Vigencia: 2020/2022 )
Productividad Académica
Publicaciones en revistas
(2021) An approximate model of a multilayer wire-on-tube condenser operating with
R134a and R600a: experimental validation and parametric analysis, Case Studies in Thermal Engineering.
(2020) Numerical Study of the Double Difusion Natural Convection inside a Closed
Cavity with Heat and Pollutant Sources Placed near the Bottom Wall, Energies.
(2020) Parametric analysis of the thermal behavior of a single-channel solar chimney, Solar Energy.
(2020) Overview of low GWP mixtures for the replacement of HFC refrigerants:
R134a, R404A and R410A, International Journal of Refrigeration.
(2020) Experimental study of an earth to air heat exchanger (EAHE) for warm humid
climatic conditions, Geothermics.
(2020) Numerical Study of the Distribution of Temperatures and Relative Humidity in
a Ventilated Room Located in Warm Weather, Computer Modeling in Engineering & Sciences.
(2019) Development of a solar calorimeter for the thermal evaluation of glazing
samples, Journal of Building Physics.
(2018) Comparative Account of Phenolics, Antioxidant Capacity, α-Tocopherol and
Anti-nutritional Factors of Amaranth (Amaranthus hypochondriacus) Grown in the Greenhouse and Open Field, International Journal of Agriculture & Biology.
(2018) Numerical Study on the Effect of Distribution Plates in the Manifolds on the
Flow Distribution and Thermal Performance of a Flat Plate Solar Collector, Energies.
(2017) Transient behavior of CO2 in the internal heat exchanger during the start-up of
the transcritical refrigeration system. Journal Science and Technology for the Built Environment.
(2017) Comparative analysis of a concentric straight and a U-bend gas cooler
configuration in CO 2 refrigeration system, International Journal of Heat and Mass Transfer.
(2017) Comparison of Chemical Composition and Growth of Amaranth (Amaranthus
hypochondriacus) between Greenhouse and Open Field Systems. INTERNATIONAL JOURNAL OF AGRICULTURE & BIOLOGY.
(2017) The Influence of Climate on Rural Housing: Thermal Bioclimatic Elements and
"Psycho-Thermal-Stress, Urban Planning and Design Research.
(2016) Effect of different building materials on conjugate heat and mass transfer,
INGENIERÍA MECÁNICA TECNOLOGÍA Y DESARROLLO.
(2016) Double diffusion numerical simulation for an aired room with inner pollutant
sources, Conference Proceeding, Communications in Computer and Information Science.
(2016) Transient behavior of CO2 in the internal heat exchanger during the start-up of
the transcritical refrigeration system, Science and Technology for the Built Environment.
(2016) Numerical study of the effect of buoyancy on conjugate heat transfer in
simultaneous turbulent flow in parallel pipelines, International Journal of Heat and Mass Transfer.
(2015) Numerical study of thermal environment of a greenhouse dedicated to amaranth
seed cultivation, Solar Energy.
(2015) Thermal and energetic evaluation of a novel polymer-ceramic composite as
insulation for a household refrigerator, DYNA.
(2014) Indoor air quality analysis based on the ventilation effectiveness for CO 2
contaminant removal in ventilated cavities, Revista Mexicana de Física.
(2014) Evaluation of Different Concentrations of Nitrogen for Tomato Seedling
Production (Lycopersicon esculentum Mill), Universal Journal of Agricultural Research.
(2014) Numerical investigation of transient heat and mass transfer by natural
convection in a ventilated cavity: Outlet air gap located close to heat source, International Journal of Heat and Mass Transfer.
(2014) Numerical study of the double diffusive convection phenomena in a closed cavity
with internal CO 2 point sources, International Journal of Heat and Mass Transfer.
(2014) Conjugate heat and mass transfer by natural convection in a square cavity filled
with a mixture of Air–CO 2 , International Journal of Heat and Mass Transfer.
(2013) Heat and mass transfer by natural convection in a square cavity filled with a
mixture of Air–CO 2 , International Journal of Heat and Mass Transfer.
(2013) Optimum Ventilation Based on the Ventilation Effectiveness for Temperature
and CO 2 Distribution in Ventilated cavities, International Journal of Heat and Mass Transfer.
(2013) Coupling CFD-BES Simulation of a Glazed Office with Different Types of
Windows in Mexico, Building and Environment.
(2013) Effect of a Contaminant Source (CO 2 ) Inside a Ventilated Room: Thermal
Comfort-Air Quality, Researches and Applications in Mechanical Engineering.
(2010) Discussion of ‘‘Numerical study of natural convection dominated heat transfer
in a ventilated cavity: Case of forced flow playing simultaneous assisting and opposing roles” by A. Raji, M. Hasnaoui, A. Bahlaoui [Int. J. Heat Fluid Flow 29 (2008) 1174–1181] International Journal of Heat and Fluid Flow.
(2018) Estudio de iluminación en un aula de educación superior para la eficiencia
energética, Perspectivas de la Ingeniería para el Desarrollo Sustentable. ISBN 978-607-606-458-0. COLECCIÓN JOSÉ N. ROVIROSA, Universidad Juárez Autónoma de Tabasco.
(2015) An analytical retrospective of Mexico for a sustainable future, Mexico in
Focus: Political, Environmental and Social Issues, Edited by José Galindo, ISBN: 978-1-63463-197-6. Nova Science Publishers, Inc.
Memorias de congresos internacionales
(2015) Thermal comfort and air quality analysis of a ventilated cavity: a single or
multiple air outlets. Proceedings of the 1st Thermal and Fluid Engineering Summer Conference, TFESC, August 9-12, New York City, USA.
Proyectos de Investigación
(2018-2019) Estudio numérico y experimental de la caracterización Térmica de envolventes transparentes para edificaciones de alto impacto energético. Apoyo a la Investigación Científica y Tecnológica en los Programas Educativos, TecNM, Modalidad: Profesores reconocidos en el SNI, por un monto de $200,000.00. Rol: Responsable Técnico.
(2018-2019) Diseño de suelos para construcción: como alternativa para disminuir la intensidad sísmica en zonas de riesgo. Apoyo a la Investigación Científica y Tecnológica en los Programas Educativos, TecNM, Modalidad: Cuerpo académico, por un monto de $166,000.00. Rol: Colaborador.
(2017-2019) Celdas Paslink: estrategia de sustentabilidad energética de viviendas de interés social. Apoyo otorgado por PRODEP, Modalidad: Fortalecimiento de C.A. Por un monto de $220,000.00. Rol: Responsable Técnico.
(2016-2017) Sustentabilidad energética en zonas rurales: sistemas térmicos pasivos para viviendas de bajos recursos. Apoyo otorgado por PRODEP, Modalidad: NPTC, Apoyo de Fomento a la Generación y Aplicación innovadora del Conocimiento, por un monto de $380,000.00. Rol: Responsable Técnico.
